How to Setup Solstice DiskSuite / Solaris Volume Manager Common to both options below: 1. Create identical partitioning on the second disk dd if=/dev/rdsk/c0t0d0s2 of=/dev/rdsk/c0t1d0s2 count=16 2. Setup the state databases with 3 backups per slice on each disk metadb -a -f -c 3 c0t0d0s7 c0t1d0s7 For all slices except root -------------------------- Description Mirror Name Device Name 1st mirror d4 c0t0d0s4 2nd mirror d5 c0t1d0s4 Metamirror d3 /dev/md/dsk/d3 1. Create submirrors for the mirrors a) metainit -f d4 1 1 c0t0d0s4 b) metainit d3 -m d4 c) metainit d5 1 1 c0t1d0s4 2. Make a backup of the /etc/vfstab file before editing it 3. Make the following change in the /etc/vfstab file /dev/md/dsk/d3 /dev/md/rdsk/d3 /usr ufs 1 no - 4. Reboot 5. Attach the submirror to the metamirror metattach d3 d5 (NOTE: There will be lots of disk I/O) For the root slice only ----------------------- Description Mirror Name Device Name 1st mirror d1 c0t0d0s0 2nd mirror d2 c0t1d0s0 Metamirror d0 /dev/md/dsk/d0 1. Create submirrors for the mirrors a) metainit -f d1 1 1 c0t0d0s0 b) metainit d0 -m d1 c) metainit d2 1 1 c0t1d0s0 2. Make a backup of the /etc/vfstab file 3. Let the metaroot command make the /etc/vfstab and /etc/system changes for you metaroot d0 4. Run lockfs to prevent problems lockfs -fa 5. Shutdown the server /usr/sbin/shutdown -y -g0 -i0 6. From the boot prompt, run show-disks 7. Pick your mirrored disk from the list and then setup an alias like so nvalias mirror ^y (that is a -y to paste the device path) 8. Change your boot-device to first try the normal disk alias, then use your mirror disk setenv boot-device disk mirror 9. Reset/reboot the server reset-all 10. Attach the submirror to the metamirror metattach d0 d2 (NOTE: There will be lots of disk I/O) 11. Do an ls and copy the info down as this is the alternate boot path ls -l /dev/rdsk/c0t1d0s0 If you only have two mirrored root disks (DiskSuite 4.2.1, Solaris 8), put this setting in your /etc/system: set md:mirrored_root_flag=1 For more information, go check out this handy tip: http://www.sysunconfig.net/unixtips/ignore_quorum.txt -Contributed by David Cashion